Earthingz logoEarthingz
Insights

Field notes from our engineering desk.

Standards explainers, installation guides and lessons learned from a decade of measured earth.

Product Knowledge

A deeper look at every product.

Detailed engineering notes for each item in our catalogue — what it is, where it fits and the specifications that matter on site.

Copper Bonded Earth Electrodes
Earthing Solutions

Copper Bonded Earth Electrodes

Copper-bonded earth electrodes combine the mechanical strength of a low-carbon steel core with the corrosion resistance and conductivity of a molecularly bonded electrolytic copper layer. The thick copper coating prevents the copper from peeling during driving, ensuring decades of stable, low-resistance contact with the soil. They are the workhorse electrode for most industrial and commercial earthing systems, offering an excellent balance of performance, longevity and cost. Joinable sections with threaded brass couplers let installers reach deep, moist soil strata for consistently low earth resistance.

Core
Low-carbon steel, copper-bonded
Diameter
14.2 / 17.2 / 20 mm
Length
1 m – 3 m (joinable)
Termination
Threaded with brass coupler & driving stud
Standard
IS 3043 / UL 467
Request a quote
Pure Copper Earth Electrodes
Earthing Solutions

Pure Copper Earth Electrodes

Pure copper electrodes are machined from 99.9% electrolytic copper, delivering the lowest possible earth impedance and the longest service life of any electrode type. With no steel core to corrode, they are the preferred choice for substations, telecom sites and sensitive electronic installations where signal integrity and personnel safety are non-negotiable. The high conductivity of solid copper keeps fault-current rise times fast and earth potentials low, protecting both equipment and people during faults and lightning events.

Material
99.9% Electrolytic Copper
Diameter
17 / 20 / 25 mm
Length
1 m – 3 m
Application
Substations · Telecom · Sensitive electronics
Standard
IS 3043
Request a quote
GI Earth Electrodes
Earthing Solutions

GI Earth Electrodes

Hot-dip galvanised iron (GI) electrodes are a robust, budget-friendly option for general building and industrial earthing where soil conditions are not aggressively corrosive. A zinc coating of at least 80 microns sacrificially protects the steel beneath, extending service life in normal soils. Available as pipes or strips, GI electrodes are easy to source, install and bond, making them a practical default for distribution boards, lightning earth pits and equipotential bonding grids on a controlled budget.

Material
Hot-Dip Galvanised Steel
Coating
≥ 80 microns zinc
Sizes
40 / 50 / 65 NB pipe · 25×3 / 50×6 mm strip
Length
Up to 3000 mm
Standard
IS 2629 / IS 3043
Request a quote
Chemical Earthing Backfill Compound
Earthing Solutions

Chemical Earthing Backfill Compound

Chemical earthing backfill compound surrounds the electrode with a highly conductive, moisture-retentive medium that dramatically lowers earth resistance — especially in rocky, sandy or high-resistivity soils where electrodes alone struggle. The compound conditions the soil, draws and holds moisture around the electrode, and keeps the earth resistance stable across dry seasons. It is the key to achieving and maintaining the sub-ohm earth values demanded by data centres, telecom towers and critical industrial plant.

Function
Soil conditioning and moisture retention
Resistance
Low-resistivity conductive mix
Application
Electrode pits · Earth pits · Rocky soil
Packaging
Sealed bags in standard site quantities
Compliance
IS 3043 / IEEE 80
Request a quote
Earthing Accessories
Accessories

Earthing Accessories

A reliable earthing system is only as good as the hardware that connects it. Our accessories range covers everything between the electrode and the equipment: earth rods and couplers, clamps and lugs, earth plates, copper strips, copper earthing wire, test links and earth-pit covers. Every component is matched for material compatibility — copper, brass and GI — to prevent galvanic corrosion at joints and to keep contact resistance low for the full life of the installation.

Range
Rods · Clamps · Earth plates
Conductors
Copper strips · Copper earthing wire
Hardware
Bolts · Lugs · Test links · Earth pit covers
Material
Copper · Brass · GI
Compliance
IS 3043
Request a quote
EV Charger Earthing
Earthing Solutions

EV Charger Earthing

EV charging stations place unusual demands on earthing: high power, sensitive power electronics and frequent human contact all in one place. Our EV charger earthing packages deliver dedicated low-impedance grounding designed for AC and DC chargers, complete with electrode, conductors and a test pit. The system is built to support residual-current and surge protection and to achieve the sub-1-ohm earth resistance many charger manufacturers and codes require, keeping users, vehicles and expensive charging hardware safe.

Application
AC & DC EV chargers · Charging stations
Includes
Earth electrode · Conductors · Test pit
Protection
Surge & residual current protection ready
Earth Resistance
Designed for < 1 Ω where required
Standard
IS 3043 / IEC 60364
Request a quote
ESE Lightning Arrester
Protection Systems

ESE Lightning Arrester

ESE (Early Streamer Emission) lightning arresters launch an upward streamer earlier than a passive rod, giving each terminal a substantially larger protection radius. This lets a single, well-placed terminal protect large buildings, plants, towers and warehouses with fewer down conductors and less rooftop clutter. Supplied as a complete system — air terminal, mast, down conductor and earth pit — and designed to NFC 17-102 / IEC 62305, ESE systems are ideal where wide-area structural protection is needed efficiently.

Type
Early Streamer Emission (ESE)
Body
Stainless Steel
Application
Buildings · Plants · Towers · Warehouses
Includes
Air terminal · Mast · Down conductor · Earth pit
Standard
NFC 17-102 / IEC 62305
Request a quote
CSE Lightning Arrester
Protection Systems

CSE Lightning Arrester

Conventional (Franklin rod / CSE) lightning protection uses a network of air terminals, down conductors and a low-resistance earth to intercept strikes and channel them safely to ground. It is the time-tested, standards-compliant approach mandated by many specifications and authorities. We engineer the full system to IS / IEC 62305 — calculating terminal placement, conductor routing and earth termination so that the structure, its occupants and its equipment are protected with a clear, auditable design.

Type
Conventional / Franklin rod (CSE)
Body
Stainless Steel · Copper finials
Application
Buildings · Plants · Towers · Warehouses
Includes
Air terminal · Mast · Down conductor · Earth pit
Standard
IS / IEC 62305
Request a quote
Low Voltage Electrical Panels
Electrical Control & Distribution

Low Voltage Electrical Panels

Our low-voltage panels are engineered, wired and routine-tested in our own facility, giving you full control over quality and lead time. The range spans LT/PCC distribution boards, APFC panels for power-factor correction, drawout and MCC panels for motor control, and VFD panels for variable-speed drives. Built from CRCA sheet with powder-coated finishes and IP 42–54 protection, every panel is manufactured to IS 8623 / IEC 61439 and configured to the exact single-line diagram of your installation.

Types
LT / PCC · APFC · Drawout · MCC
Drives
Variable Frequency Drive (VFD) panels
Distribution
Lighting & distribution panels
Build
CRCA sheet · Powder coated · IP 42–54
Compliance
IS 8623 / IEC 61439
Request a quote